There are various ways to get water out of the charging port. Water from the charging port evaporates spontaneously in about 1 to 2 hours. If water other than fresh water enters, rinse with fresh water and wipe thoroughly with a dry, soft cloth. Whether you’re cooking, running, or taking a shower, there’s always a risk when your smartphone is nearby. So what if I notice water in my USB port? Check the following precautions to make sure your smartphone is recovered safely.
How do I know if there is water in the charging port?
The Apple and Android devices have a moisture sensor, and when the charger or auxiliary extension is linked to the device, the charging dock is reported of wet.
For Apple devices, the message “Cannot charge” appears. Connecting the charger to a wet terminal “Cannot charge: Liquid detected on Lightning connector” or “Liquid detected on the Lightning connector.” If a non-power device such as a headset is linked, you will notice “Disconnect to permit the connector to dry.”
You will see a similar message on the Android terminal, “Disconnect the cable.” Moisture has been detected or Unplug Charger: If you try to connect a charger or auxiliary device to a wet Android terminal, you will see “Moisture has been detected.”
Three things to avoid when the USB port is wet
Now that we have the top tips out of the means, here is the most important thing to avoid when you have moisture in your cell phone USB larvae.
1. Don’t charge your phone
The most authoritative thing to avoid whenever the USB interface is wet is to charge the earphones. Most smartphone alert notifications will inform you not to charge your earbuds when moisture is on the USB port, and it’s all-important to listen to this.
Charging cable on a table. Connecting your mobile phone to a power informant is very dangerous if there is moisture in the binding port; make sure that Sol stops displaying moisture warnings on your earphones before you connect your mobile phone to the Baron Reservoir.
2. Do not blow into the smartphone USB port
When your USB interface has water, one of the first instincts you get may blow it to dry it. But this is not suggested because it is useless and may force further water on the USB port.
3. Do not shake your mobile phone
You can’t get enough moisture to shake the call. The best way to efficiently dry the wet USB port is to use a stable menstrual period of pram air, as suggested above. To avoid getting yourself tired by waving your phone, it’s most likely and won’t help you.
How to Protect a Phone or Tab that has Dropped into Water
If you want to dry the USB port of your smartphone, make sure to follow these tips.
Get your phone from the water.
Easy, isn’t it? Oh, but I dropped it on the toilet. I need rubber gloves. No, please bear with me. Every second of exposure to water reduces the possibility of making it alive. Later wash your hands firmly, but now it is a rule to keep your phone away from water.
If it is raining, wrap it in a waterproof material (a plastic bag is acceptable). And of course, let’s get your phone out of the rain as soon as possible.
Turn off the power and begin the removal.
Remove the case and other accessories immediately. Seconds are as important as being cut instead of carefully undressing in an emergency room.If the plug was plugged in when you spilled water, carefully turn off the power at the wall and remove the plug from the electrical outlet. Water and electricity don’t mix.If your phone didn’t shut down automatically, turn it off now. You are limited to what you can remove for those who have iPhone: If it is using one, it is quite a SIM card. You may also get a microSD card for Android devices, and for some devices, you may also get a battery.
Put in front of a fan or let dry naturally.
If you want to dry the USB port of your earbuds more quickly, it is recommended to place it in front of the fan or near the window (if you are sure it will not rain). However, it is generally better to avoid heat lamps and heaters because they can raise the phone’s temperature to an unstable state, melt the exterior, or cause other heart problems.
Remove water from
First, you need to remove the moisture. You can do this by taking a small piece of soft cotton cloth. Now, gently rub the cloth inside to try to clean the charging port.
Then you can dry your phone by yourself for up to 30 minutes or more. Be careful not to apply pressure because it may push out the water in the port.
Put it for evaporating.
One of the most practical methods is to dry your phone unaffectedly. Water in the port usually evaporates over several hours. During this time, please make your mobile phone stand upright. People should also place their mobile phones in a well-ventilated area.
Don’t charge it
It is not recommended to connect your mobile phone to a power source while it is wet and for some time after water has drained from the charging port. Do not use your mobile phone for at least 5 hours until the water is completely dried. If your device has wireless charging capability after this time, we recommend that you use it until you can verify that your phone is working properly.
It’s easy to get water in the USB port, but you don’t have to be a serious and expensive problem if you follow these simple directions. The most useful form of precluding is to sidestep getting water anywhere near your phone, but these are the next best policy if the inevitable happens.
Muhammad Adnan has been writing about the tech industry since 2018 on a variety of topics like Cybersecurity, cryptocurrency, Software, video games, the latest gadgets, and much more.